Table of Contents
Advertisement
4.Sequence Function
Creating step 4
Setting the number of loops
Saving the Program1
PLZ-5W
1
Press Insert.
Step 4 is inserted.
2
Use the rotary knob and the ← key to select a cell in the Level
column of Step 4 (4th row), and then press Edit.
3
Use the numeric keypad or the rotary knob to enter current
value "3", and then press ENTER.
4
Use the → key to select a cell in the Dwell column, and then
press Edit.
5
Use the numeric keypad or the rotary knob to enter execution
time "15", and then press ENTER.
6
Use the → key to select a cell in the Load column, and then press
Edit.
7
Press the Load sub-function key.
8
Press Immediate and then Edit.
9
Use the → key to select a cell in the Generate column, and then
press Edit.
10
Press Trig Out and then Edit.
1
Press Property and then Loop.
2
Use the numeric keypad or the rotary knob to enter number of
loops "2", and then press ENTER.
3
Press Property.
1
Press Save.
The Program1 is registered.
Sequence creation tutorial
65
Advertisement
Table of Contents
