Table of Contents
Advertisement
Sequence creation tutorial
Creating step 2
Creating step 3
64
1
Press Insert.
Step 2 is inserted.
2
Use the rotary knob and the ← key to select a cell in the Level
column of Step 2 (2nd row), and then press Edit.
3
Use the numeric keypad or the rotary knob to enter current
value "6", and then press ENTER.
4
Use the → key to select a cell in the Dwell column, and then
press Edit.
5
Use the numeric keypad or the rotary knob to enter execution
time "12", and then press ENTER.
6
Use the → key to select a cell in the Load column, and then press
Edit.
7
Use the rotary knob to select Immediate, and then press Edit.
1
Press Insert.
Step 3 is inserted.
2
Use the rotary knob and the ← key to select a cell in the Dwell
column of Step 3 (3rd row), and then press Edit.
3
Use the numeric keypad or the rotary knob to enter current
value "7", and then press ENTER.
4
Use the → key to select a cell in the Load column, and then press
Edit.
5
Press the Load sub-function key and then Edit.
The setting changes to Load Off.
4.Sequence Function
PLZ-5W
Advertisement
Table of Contents
