Display
1
2
10
11
12
13
No.
Name
1
Setting of operation mode
2
Current range
3
Voltage range
4
Remote control mode
5
Operation mode
6
LAN connection status
7
Icon display
/ /
8
Sub-function area
9
Function area
10
Message area
11
Measured value display
12
Integrated data display
13
Value
10
3
4
5
6 7
8
9
Function
Displays the currently selected operation mode.
Displays the current range.
Displays the voltage range.
Indicates that the product is being controlled remotely.
Displays the currently running operation mode.
Displays the status of the LAN connection.
Green: Communication enabled. Orange: Preparing for communication.
Red: Not connected.
—
Indicates that the switching function is currently being used.
Indicates that measured values are being recorded.
Indicates that remote sensing is in progress.
Indicates that key lock is on. The key lock level is displayed numerically.
Sequence in progress.
Displayed when SCPI error occurs. The number of error incidents (up to 16) is dis-
played numerically.
Indicates that execution is possible with the keys (sub-function keys) in the right
side of the display.
Indicates that execution is possible with the keys (function keys) at the bottom of the
display.
Displays alarm messages.
Displays the current, voltage, and power values.
The load input ratio for each rating is displayed in bar graph form under the current
value and voltage value.
When integrated data display is enabled, displays the integrated data.
Displays load settings (current, conductance, voltage, power) and other settings
such as slew rate and alarm operating conditions.
See
p.21
p.27
p.27
p.54
—
—
p.31
p.36
p.43
p.86
p.66
p.90
p.19
p.19
p.32
—
p.40
—
PLZ-5W