Create A New Policy Package; Define A Host - Check Point UTM-1 U-5 Getting Started Manual

The following is a very simple Firewall rule base:
Source Destination
Network Object Any
Network Object Any
Host Object Any
Host Object Any
Any Any
The last rule in the rule base, known as the Cleanup Rule, is to drop all traffic that is not
permitted by the previous rules. There is an implied rule that does this, but the Cleanup Rule
allows you to log any access attempts.
Create a security policy as follows:

Create a New Policy Package

1. In SmartDashboard, click File > New. The Save window appears.
2. Click Save and continue. The New Policy Package window appears.
3. Enter a name for the new policy, select a policy type and click OK.

Define a Host

Define the hosts to be used in the Firewall Rule Base.
To define a host:
1. Click Manage > Network Objects > New > Node > Host. The Host Node window
appears.
2. Enter a Name and IP Address (for example, 10.10.10.51).
3. In the NAT page, select Add Automatic Address Translation rules.
26 | UTM-1 Getting Started Guide
Service Action
http Accept
https
dns Accept
ftp Accept
telnet Accept
Any Drop
Track
Log
Log
Log
Log
Log