Authentication Details; Date And Time Setup; Device Name; Network Connection - Check Point UTM-1 U-5 Getting Started Manual

If you select a SecurePlatform software image, use the SecurePlatform First Time
Configuration Wizard to configure the appliance.

Authentication Details

The default password gives you access to the appliance. For security purposes, change it to a
more secure password.

Date and Time Setup

Set the system time and date for the appliance:

Manually

From a time server, using Network Time Protocol (NTP)

Device Name

Set the host name, domain name, and DNS servers for IPv4 addresses. The host name must
start with a letter and cannot be named com1, com2....com9.
You can use the Gaia WebUI to configure IPv6 DNS servers.

Network Connection

Connection Information - Configure the IPv4 interface information for the management
interface. You can change the Management IP address. Connectivity is maintained with an
automatically created secondary interface. After you complete the First Time Configuration
UTM-1 Getting Started Guide | 17