Set Up Automatic On & Off Times; (All Equipment); Boost Pool Setup; Programming - Jandy Pro Series AquaLink RS OneTouch Control Systems Owner's Manual

Page 42
4.9.2.(A)

BOOST POOL SETUP

MENU/HELP
SYSTEM SETUP
Select to adjust the number of
hours or mode of the Boost Pool.
• The MODE selection is only
available if the Power Center
Bezel DIP Switch 3 (Spillover
Mode) is turned ON. If OFF, only
TIME is displayed.
• System auto-detects the
AquaPure Chlorine Generator.
SECTION 5. PROGRAMMING
5.1 SET UP AUTOMATIC ON & OFF TIMES

(All Equipment)

MENU/HELP
PROGRAM
Select to set the ON and OFF
times for any piece of equip-
ment controlled by the AquaL-
ink RS.
• Programs can be set for all days,
weekends, weekdays, or specific
days of the week.
• Each piece of equipment can be
programmed for multiple on/off
times each day.
• Programs can be added, deleted,
or changed as needed.
• Program must be displayed when
deleting or changing.
ENGLISH
System Setup
OneTouch
Label Aux
Aquapure
Freeze Protect
Air Temp
Degrees C/F
Temp Calibrate
In Floor Clean
ON
OFF
All Days
Use ARROW KEYS
to set value.
Press SELECT
to continue
AquaLink RS OneTouch™ | Owner's Manual
®
More
Program
Filter Pump
Spa
VSP1 SPD PGM
Aux 2
More
Program
No Programs
Entered
Add Program
Filter Pump
New Program
1:00PM
1:00PM
Boost Pool
Setup
Time 24 Hrs
Mode Pool
Use ARROW KEYS
to set value.
Then SELECT.
Filter Pump
PGM 1 OF 3
ON 7:00AM
OFF 1:00PM
All Days
PgUp MORE PgDn
Add Program
Delete
Program
Change Program