Aquapure; Set Aquapure; Boost Pool - Jandy Pro Series AquaLink RS OneTouch Control Systems Owner's Manual

AquaLink RS OneTouch™ | Owner's Manual
®

4.9 AQUAPURE

4.9.1 SET AQUAPURE

MENU/HELP
Select to set chlorine output
percentage from the AquaPure
chlorine generation system to both
the pool and spa.
• AquaPure systems communicate
directly with the AquaLink
AquaLink PDA and AquaLink Z4.
• Displays % of chlorine output.
• Allows for two (pool and spa)
set points for chlorine production
when interfaced with AquaPure or
PureLink™.
• Menu is only active when an
AquaPure system is connected to
the AquaLink RS.

4.9.2 BOOST POOL

MENU/HELP
Select to activate the Boost Pool
feature that operates the AquaPure
chlorine generator in Pool Mode at
100% output for 24 hours.
• BOOST POOL mode overrides
all programs, ALL OFF settings,
as well as the manual operation of
the filter pump.
• Boost is not available in Spa
mode.
The AquaLink RS is compatible with only Jandy
AquaPure, Jandy PureLink, amd Clormatic
branded Electronic Chlorine Generators.
Connecting other brands of Electronic Chlorine
Generators to the AquaLink RS system will
disable the Electronic Chlorine Generator and
cause the AquaLink RS to function improperly.
®
RS,
®
WARNING
ENGLISH
Menu
Menu
Program
Set Temp
Set Time
Set Aquapure
Display Light
Lockouts
Program Group
System Setup
Boost Pool
Menu
Help
Program
Set Temp
Set Time
Set Aquapure
Display Light
Y
Lockouts
Program Group
System Setup
Boost Pool
If boost
is already running
Page 41
Set Aquapure
Set Pool To: 0%
Set Spa To: 0%
Highlight an
item and press
SELECT
Set Aquapure
Set Pool To: 50%
Set Spa To: 0%
Use ARROW
KEYS
to set value
Then SELECT
Boost Pool
Operate the
AQUAPURE
chlorinator
at 100%
for 24 hrs.
Start
Go Back
Boost Pool
Time Remaining
23:59
Pause
Restart
Stop
Go Back