E-2) Label Speeds; E-3) Assign Speeds - Jandy Pro Series AquaLink RS OneTouch Control Systems Owner's Manual

AquaLink RS OneTouch™ | Owner's Manual
®
Default Speed Labels
for Dual Equipment
Default Pool Pump
1 POOL
2 SPEED 2
3 SPEED 3
*
4 SPEED 4
5 POOL HEAT
6 SPA HEAT
7 SPEED 7
***
8 INFLOOR
*CLEANER will display if dip S1-1 is on
***SOLAR HEAT will display if dip S1-7 is on
***HEATPUMP will display if dip S2-7 is on

4.3.3.(E-2) LABEL SPEEDS

Select to set or edit each of the
eight (8) speed presets. Labels can
be changed from the default value
from a predetermined list of general
labels or by a custom text entry.

4.3.3.(E-3) ASSIGN SPEEDS

Select to assign speed to
independent auxiliaries (AUX).
When the auxiliary is activated
the pump will run at the assigned
speed. If more than one auxiliary
(AUX) is turned on with an
assigned speed the default will be
for the pump to run at the higher of
the two speeds.
Pump 1
Spa Pump
Pump 2
Pump 3
SPEED 1
Pump 4
SPA
SPEED 3
SPEED 4
POOL HEAT
SPA HEAT
Pool
Spa
SPEED 7
Speed3
Speed4
SPEED 8
Pool Heat
Spa Heat
Solar Heat
Infloor
Pump 1
Pump 2
Pump 3
Aux 1
Aux 2
Aux 3
Aux 4
Aux 5
Aux 6
Aux 7
ENGLISH
Label Speeds
Label Speeds
Pump 1
Label Speed1
General Labels
Pool
Aerator
Air Blower
Backwash
Booster Pump
Chem Feed
Cleaner
MORE
Label Speeds
Assign Speeds
Pump 1
Page 23
Speed/labels
Pump 1
Set Speed
Label Speeds
Assign Speeds
Label Speed
Current Label
Speed1
General Labels
Custom Labels
Highlight an
Item and press
SELECT
Speed/labels
Pump 1
Set Speed
Label Speeds
Assign Speeds
Assign Speeds
Aux 1
Speed1
X
Speed2
Speed3
Speed4
Speed5
Speed6
Speed7