Program Filter Pump; Pump Lockout; Filter Pump (Dual Equipment) - Jandy Pro Series AquaLink RS OneTouch Control Systems Owner's Manual

AquaLink RS OneTouch™ | Owner's Manual
®
4.3.1.(B)

PROGRAM FILTER PUMP

MENU/HELP
PROGRAM
Select to program the ON and
OFF times for the filter pump or to
change, add or delete existing filter
pump programs.
• Programs can be set for any range
of days.
• Programs can be set for multiple
on/off times each day.
• Programs can be added, deleted, or
changed as needed.
• Program must be displayed when
deleting or changing.
• A program with a start time earlier
than the current time will execute
on the following programmed day.
4.3.1.(C)

PUMP LOCKOUT

MENU/HELP
SYSTEM SETUP
Select to ENABLE (pump off)
or DISABLE (pump remains on)
when valves rotate from pool to
spa.
4.3.1.(D)

FILTER PUMP (DUAL EQUIPMENT)

EQUIPMENT ON/OFF
Select to turn the main filtration
pump on and off.
For dual equipment configurations
additional equipment options will
be available, and both the filter
pump and spa pump can operate
simultaneously
ENGLISH
Program
Filter Pump
Spa
VSP1 SPD PGM
Aux 2
Program
No Programs
Entered
Add Program
Filter Pump
New Program
ON 1:00PM
OFF 1:00PM
All Days
Use ARROW KEYS
to set value.
Press SELECT
to continue
System Setup
Freeze Protect
Air Temp
Degrees C/F
Daylight Savin
Temp Calibrate
In Floor Clean
Solar Priority
Pump Lockout
More
Filter Pump OFF
Spa Pump OFF
OFF
Pool Heat
Spa Heat OFF
Auxb1 OFF
MORE
Page 19
More
Filter Pump
PGM 1 OF 3
ON 7:00AM
OFF 1:00PM
All Days
PgUp MORE PgDn
Add
Program
Delete
Program
Change Program
Pump Lockout
During
Valve Switching
ENABLED
DISABLED
Choose setting
and Press SELECT
Filter Pump ON
Spa Pump OFF
OFF
Pool Heat
Spa Heat OFF
Auxb1 OFF
MORE