Discharge Pump; Cleaning Agent Dosing Pump; Rinsing Agent Dosing Pump - Bartscher US E500 LPR Manual

Table of Contents

Advertisement

Installation Instructions
5.5

Discharge Pump

The appliance is equipped with the discharge pump that, when properly set,
provides for discharging water after washing.
In such a case, the height of 680 mm cannot be exceeded (Fig. 1, Fig. 4).
Fig. 4 Setting of the drain height through the drain pump.
5.6

Cleaning Agent Dosing Pump

The appliance is equipped with the cleaning agent dosing pump. Thanks to this
dosing device the appropriate quantity of cleaning agent is added to the wash-tank
each time.
Located at the rear of the appliance, the hose with marking for cleaning agent (D,
Fig. 1) should be introduced to the tank with cleaning agent.
Operation: the cleaning agent dosing pump is activated when the appliance
collects water during washing or filling process.
Setting: the quantity of cleaning agent should be set during the installation at the
cleaning agent dosing pump, so that the user may use all washing features in an
optimum way from the very beginning.
The hose in the cleaning agent dosing pump must be replaced annually.
ATTENTION!
Use ONLY liquid leaning agent, designed for professional use, which is
suitable for using in high temperatures and shows little foaming
properties.
Klars Kl
5.7

Rinsing Agent Dosing Pump

The appliance is equipped with the rinsing agent dosing pump. Thanks to this
dosing device, the appropriate quantity of rinsing agent is added to the wash-tank
each time.
Located at the rear of the appliance, the hose with marking for rinsing agent (C, Fig.
1) should be introduced to the tank with rinsing agent.
The hoses are transparent, thus the introduced chemical compounds are always
visible.
Operation: Thanks to this dosing device, the liquid rinsing agent is supplied
whenever a drop in pressure is detected during rinsing. This happens when the
filling valve is closed. As an outcome, underpressure is generated, which causes
the liquid to be sucked by the rinsing agent dosing device.
Setting: this dosing device should be set up during the installation, because only
this way the user may use all washing features in an optimum way from the very
110500
EN
15 / 28

Advertisement

Table of Contents
loading

This manual is also suitable for:

110500

Table of Contents