Table of Contents
Advertisement
Operation and Maintenance Instructions
Switching the Appliance ON
Before switching the appliance on make sure that the following conditions are met:
– the main switch is off;
– water shut-off valve is open;
– water supply is ensured;
– all filters are installed in their respective locations;
– overflow is in the right location;
– appliance door is closed;
– selector switch (A) is rotated to 120 position.
Filling and Heating Process
Filling process begins after starting the appliance. First the rinsing boiler is filled in,
and then the wash tank. Filling process may take up to a few minutes. As soon as
the wash tank is filled in, the heating process of boiler starts. When the boiler is
heated up, the heating process of wash tank starts. Although it would be now
possible to start the washing process, the manufacturer does not recommend this,
because the water inside the appliance has not reached the optimum temperature
yet.
As soon as the appliance reaches temperature ideal for correct washing of
tableware, the temperature indicator light is lit.
The appliance must reach proper temperatures: 82–90°C in the boiler, and 55–62°C
in the tank, respectively.
110500
EN
17 / 28
Advertisement
Table of Contents
