Table of Contents
Advertisement
It is recommended that the water in the appliance should be changed every 40/50
washing cycles or twice a day.
NOTE: To start the filling process, the appliance door must be fully closed.
Due to safety reasons, the appliance cannot be filled with door open.
The appliance is equipped with a safety thermostat inside the boiler and another
safety thermostat inside the wash tank. In the case of a failure of any of the main
thermostats, the heating process is stopped.
Tableware Preparation
1. Tableware to be washed must be prepared the following way:
– Before placing tableware in the basket, remove larger food left-overs
from tableware.
– Wash glasses first.
– Always place glasses face down.
– Put the plates in plate holders in the dishwasher basket.
– Put the cutlery in the cutlery basket with handles facing down. Cutlery of
various sizes and types should be mixed.
– Insert the cutlery baskets to universal dishwasher baskets.
EN
2. When filling the dishwasher baskets pay attention to the following:
Washing Process Selection
1. Before starting the washing process, slide the appropriate basket with tableware
into the appliance.
2. Close the appliance door.
3. Select the washing cycle by rotating the control key (120).
4. Press the cycle starting control key
– Washing cycle starts.
18 / 28
max. glass height — 300 mm; max. plate height — 300 mm
Operation and Maintenance Instructions
110500
Advertisement
Table of Contents
