Table of Contents
Advertisement
Operation and Maintenance Instructions
Interrupting and Finishing the Washing Process
The washing process may be interrupted in one of the following two ways:
– the appliance is switched off → the washing process is completely
interrupted.
– the appliance door is opened → then the door is closed again during the
cycle.
After finishing the washing process, the basket with tableware may be removed.
Tableware is dried by evaporation. Remove tableware from the basket only with
clean hands. Makes sure not to scald your hands, because tableware is still hot.
Draining the Appliance with Discharge Pump
With this method, the drain hose must always be connected to a drain trap to
prevent foul scents.
Proceed the following way:
– Remove the overflow valve.
– Rotate the selector switch (A) to Drain.
– Close the appliance door.
– Press the cycle starting control key (D).
– The drain cycle starts automatically.
– When the process is finished (duration of approx. 160 seconds), you may
switch the appliance off.
Switching the appliance OFF
Set the selector switch (A) to 0 position, to switch the dishwasher off.
The manufacturer does not recommend to switch the appliance off during the
washing process, because the tableware inside the dishwasher will not be washed
properly.
110500
EN
19 / 28
Advertisement
Table of Contents
