Table of Contents
Advertisement
Malfunction
Streaks and spots on
dishes.
The appliance stops
during the washing
and starts refilling
water.
The washing cycle
does not start.
EN
Draining process is
not successfully
completed.
26 / 28
Possible Cause
Salt container is almost
empty.
Salt left-overs remain in the
wash-tank.
Clogged pressure switch.
Pressure switch malfunction.
Overflow incorrectly installed. Install the overflow
Incorrectly closed appliance
door.
Door micro switch
malfunction.
The appliance is not set
correctly.
Pressure switch malfunction.
Possible Malfunctions
Solution
Fill up the salt container (if
it is installed).
Be carful when filling the
salt container, not to spill
salt in the wash-tank.
Drain and thoroughly clean
the wash-tank.
Drain and thoroughly clean
the wash-tank.
correctly.
Close the appliance door
correctly. If the appliance
door cannot be closed,
contact technical service to
order setting of tensioning
devices.
Contact technical service
to order replacement.
Set the appliance correctly.
Contact technical service
to order replacement.
110500
Advertisement
Table of Contents
