Hood Dishwashers; Removing The Integral Filter; Emptying The Dishwasher; Appliances With No Drain Pump - Bartscher GS HH 500 LR Instruction Manual

Table of Contents

Advertisement

Select the washing cycle suited to the type of dishes using PROGRAMME SELECTION (3); with
the button pressed, the shorter cycle is enabled (Fig. 4).
Press START (3) for automatic start (Fig. 6).
Lower the hood, the cycle starts automatically and the CYCLE UNDERWAY (5) led starts to flash.
When the cycle is completed the CYCLE UNDERWAY (5) led goes off.
The next cycles come on simply by lowering the hood.
For rapid drying, remove the rack from the machine as soon as the cycle finishes.
To stop a wash cycle early, press START (3).
Move the washing and rinsing arms at right angles to the edge of the door (Fig.7).
Lift each semi-filter by the relative handle.
Switch the dishwasher off.
If present, remove the integral filter (Fig.7 A).
Pull up and remove the overflow pipe (Fig. 8 B).
Wait for the tub to empty completely.
If necessary, extract the tub filter and clean (Fig. 8 C).
Switch the dishwasher off.
If present, remove the integral filter (Fig.7 A).
Withdraw the overflow, if present, by pulling it upwards (Fig.9); the overflow is not present on partial
drain versions.
Close the door.
Press the DRAIN (2) button for a few seconds to start the cycle;
The drain cycle is shown by the POWER (5) led coming on and the CYCLE UNDERWAY (6)led
flashing.
The machine runs a drain cycle and then switches off.
If necessary, extract the tub filter and clean (Fig. 8 C).
Press the ON/OFF button (1), the POWER LED (5) will continue to flash indicating that power is
being supplied.
In machines with internal water softener, a regeneration cycle should be run periodically to ensure the
correct operation of the softener. The number of cycles between one resin regeneration and the next
depends on the hardness of the local water, and should be set in accordance with the following table.
dH
°F
N° Cicli
6
10
160
7
12
150
8
14
140
9
16
130
10
18
120
11
20
110
12
21
100
INSTRUCTION MANUAL FOR DISHWASHERS
dH
°F
13
23
14
25
15
27
16
29
17
30
18
32
19
34

4.5 Removing the integral filter

4.6 Emptying the dishwasher

4.6.1
4.6.2

Appliances with drain cycle (*optional)

4.7 Turning the dishwasher off

4.8

Resin regeneration (*optional)

N° Cicli
90
80
70
60
50
40
30
4.4.2

Hood dishwashers

Appliances with no drain pump

Page 7 of 10
UK

Advertisement

Table of Contents
loading

This manual is also suitable for:

109782

Table of Contents