Grease Points - Wallenstein LXT95 Operator's Manual

LXT95 / LXT115
Log Loader Trailer
Task
Replace the 10 hp engine air filter.
Replace the 6.5 hp engine air filter.
Hydraulic winch accessory
Check the winch rope condition.
9.4

Grease Points

Look for this decal on the machine. It indicates a
grease point and the interval in hours.
• Use a hand-held grease gun for all greasing.
• Wipe each grease fitting with a clean cloth before greasing
to avoid injecting dirt and grit.
• Replace or repair broken fittings immediately.
• If a fitting does not take grease, remove and clean the
fitting thoroughly. Also, clean the lubricant passageway. If
necessary, replace the fitting.
For more information, see the following illustrations:
• Figure 52 – LXT95 grease points on page 62
• Figure 53 – LXT115 grease points on page 63
• Figure 54 – Log grapple grease points on page 64
• Figure 55 – Hydraulic winch accessory grease points on
page 65
25 50
8 hours hours or hours or
or daily annually annually
100 200
hours or hours or
annually annually Annually
t
Location Every 50 hours of operation
1 Main boom and hydraulic cylinder
pins
2 Dipper boom and hydraulic
cylinder pins, and LXT115
bushings
3 Dipper-boom log grapple pin
4 Tandem axle (one on each side)
5 LXT95 sliding axle (one on each
side)
6 Stabilizer and hydraulic cylinder
pins (three on each stabilizer)
7 Main boom sprocket
8 Trailer tongue bushing
9 Log grapple hydraulic rotator
10 Log grapple fork pin and bushings 8
11 Hydraulic winch accessory
61
Service and Maintenance
600 hours
or every
three
years Reference
See the engine
manual
See the engine
manual
See page 71
LXT95 LXT115
points points
3 3
3 7
1 1
2 2
2 2
6 6
1 1
1 1
1 1
8
1 1