Replace The Engine Fuel; Remove The Machine From Storage - Wallenstein LXT95 Operator's Manual

Log loader trailer
Hide thumbs Also See for LXT95:
Table of Contents

Advertisement

LXT95 / LXT115
Log Loader Trailer
8.3

Replace the Engine Fuel

WARNING!
Before you replace the fuel, read and understand
the information under Engine Safety on page
34.
1. Remove the current fuel from the engine.
Operate the machine until the fuel tank is empty or drain the
fuel tank and dispose of the fuel correctly.
2. Add new fuel to the engine.
For instructions, see Add Fuel to the Engine on page 35.
3. Start the machine.
For instructions, see Start the Machine on page 41.
4. Wait five to 10 minutes for the fuel to flush the carburetor.
5. Stop the machine.
For instructions, see Stop the Machine on page 41.
8.4
Remove the Machine from
Storage
1. Do the tasks decribed in the Pre-Start Checklist on page
33.
2. Do the necessary maintenance.
For maintenance information, see the Maintenance
Schedule on page 60.
Figure 51 – Storage position
57
Storage
02082

Advertisement

Table of Contents
loading

Table of Contents