Main Hydraulic Controls - Wallenstein LXT95 Operator's Manual

Controls
5.6

Main Hydraulic Controls

IMPORTANT! Stand at the operator control panel and face
the main boom. The left hand (LH), right hand (RH), forward,
and backward directions in this section are referenced from
this position.
The machine has one main hydraulic control valve and five
control levers for the stabilizers, main boom, dipper boom,
and log grapple. The control levers are located on the operator
control panel.
2
1
6
Figure 19 – Main hydraulic controls
1. LH stabilizer - raise or lower
2. Main boom - raise, lower, or turn
3. Log grapple - open or close
4. Dipper boom - raise or lower, or log grapple turn
5. RH stabilizer - raise or lower
6. Main hydraulic control functions decal
4
3
5
02037
28
5.6.1 LH Stabilizer Control Lever
Extend
Push the lever forward to extend the LH
stabilizer.
Retract
Pull the lever backward to retract the LH
stabilizer.
5.6.2 Main Boom Control Lever
Lower
Push the lever forward to lower the main
boom.
Raise
Pull the lever backward to raise the main
boom.
Turn counterclockwise
Push the lever to your LH side to turn the
main boom counterclockwise.
Turn clockwise
Push the lever to your RH side to turn the
main boom clockwise.
5.6.3 Log Grapple Control Lever
Open
Push the lever forward to open the log
grapple forks.
Close
Pull the lever backward to close the log
grapple forks.
LXT95 / LXT115
Log Loader Trailer