Clean The Engine Air Filter - Wallenstein LXT95 Operator's Manual

Log loader trailer
Hide thumbs Also See for LXT95:
Table of Contents

Advertisement

Service and Maintenance
9.5

Clean the Engine Air Filter

IMPORTANT! If you operate the engine with no air filter,
or with a damaged air filter, dirt and debris can go into the
engine. Dirt and debris in the engine causes fast engine
wear. This type of damage is not covered by warranty.
A dirty air filter can restrict air flow to the carburetor, reducing
the engine performance. If the engine is operated in very dusty
areas, clean the air filter more often than specified.
9.5.1 Clean the LXT95 6.5 hp Engine Air
Filter
Clean the air filter every 200 hours of operation or annually.
1. Turn the two air-filter cover fasteners to loosen them.
2. Remove the cover.
3. Remove the air filter.
4. Gently tap the air filter on a hard surface to loosen and
remove dust and debris.
If the air filter is excessively dirty or damaged, replace it
with a new air filter.
5. Install the air filter in the engine.
6. Install the cover.
7. Tighten the two air-filter cover fasteners.
Figure 56 – LXT95 6.5 hp engine air filter
9.5.2 Clean the LXT115 10 hp Engine Air
Filter
Clean the air filter after every 25 hours of operation or
annually.
A dirty air filter can restrict air flow to the carburetor, reducing
the engine performance. If the engine is operated in very dusty
areas, clean the air filter more often than specified.
1. Turn the air-filter cover fastener to loosen it.
2. Remove the cover.
3. Remove the air filter.
4. Gently tap the air filter on a hard surface to loosen and
remove dust and debris.
If the air filter is excessively dirty or damaged, replace it
with a new air filter.
5. Install the air filter in the engine.
6. Install the cover.
7. Tighten the air-filter cover fastener.
Figure 57 – LXT115 10 hyp engine air filter
01809
66
LXT95 / LXT115
Log Loader Trailer

Advertisement

Table of Contents
loading

Table of Contents