Grease Points - Wallenstein LXT95 Operator's Manual

Service and Maintenance

7.2 Grease Points

Use the table below and the following illustrations to locate
grease points on the log boom, trailer, and grapple.
Look for this decal on your machine. It
indicates a grease point and the interval in
hours.
1. Use a hand-held grease gun. Wipe grease fitting with a
clean cloth before greasing to avoid injecting dirt and grit.
2. Replace and repair broken fittings immediately.
3. If fitting does not take grease, remove and clean thoroughly.
Also, clean lubricant passageway. Replace fitting if
necessary.
Location Every 50 hours of operation
1 Stabilizer and stabilizer cylinder
2 Main Boom Hoist Cylinder
3 Main Boom Pivot
4 Dipper Cylinder
5 Dipper Cylinder Links
6 Boom Nose
7 Slew Assembly Ring Gear
8 Adjustable Tandem Slide
9 Tandem Axle Rocker–one fitting per side
10 Clevis hitch
11 Rotator
12 Grapple
13 Winch Drive (Option)
46
LXT95 / LXT115
Log Trailer & Grapple