Operator Control Panel Lock - Wallenstein LXT95 Operator's Manual

Controls
5.2.4 Rewind Start
WARNING!
Fast retraction of the starter cord (called
kickback) pulls your hand and arm toward the
engine faster than you can let go of the handle.
Serious bodily harm (for example; bruises,
sprains, fractures, and broken bones) can result.
When starting the engine, pull the starter cord
slowly until you feel resistance, and then pull it
rapidly to avoid kickback.
Figure 15 – Rewind-start handle
5.3

Operator Control Panel Lock

The operator control panel can be turned to the left or right side
of the machine. Position the operator controls on the opposite
side of the machine from the work area. For example, if the work
area is on the left side of the machine, turn the operator controls
to the right side of the machine.
Turn the operator control panel:
1. Below the operator control panel, loosen the lock handle.
2. Turn the operator control panel to the necessary position.
3. Tighten the lock handle.
W102
02042
Figure 16 – Turn the operator control panel
26
LXT95 / LXT115
Log Loader Trailer
01637