Table of Contents
Advertisement
Controls
5.8
LXT95 Surge Brake Control
The surge brake control is located on the trailer tongue. Use the
surge brake control to disengage the surge brakes and prevent
them from operating. It is necessary to disengage the surge
brakes when the tow vehicle moves the machine in reverse
(backward).
For more information, see LXT95 Surge Brake Operation on
page 39.
Disengage
Turn the surge brake control to the horizontal
position to disengage the surge brakes (the
surge brakes do not operate).
Engage
Turn the surge brake control to the vertical
position to engage the surge brakes (the
surge brakes operate when the tow vehicle
speed decreases).
Figure 21 – Surge-brake control
5.9
Bunk Posts
The bunk posts are designed to keep logs on the trailer;
however, they are removable.
Each bunk post stop and mount are beveled. The beveled design
provides flexibility for the post to move when it is bumped, and
then guides the post back to an upright position.
01652
30
Log Loader Trailer
Figure 22 – Bunk posts
LXT95 / LXT115
01632
Advertisement
Table of Contents
