Hydraulic Winch Controls - Wallenstein LXT95 Operator's Manual

LXT95 / LXT115
Log Loader Trailer

5.10 Hydraulic Winch Controls

The hydraulic winch is sold separately.
Model Winch Control Location
LXT95 The hydraulic winch accessory connects to the RH
control lever (beside the sliding-axle control lever).
LXT110 The hydraulic winch accessory includes a valve and
control lever that are installed on the operator control
panel.
5.10.1 Winch Control Lever
Unwind
Push the lever forward to unwind the winch
rope.
Release the lever to stop. The lever moves to
the neutral position.
Wind
Pull and hold the lever backward to start the
winch, and then wind the winch rope onto the
drum.
Release the lever to stop. The lever moves to
the neutral position.
Figure 23 – Winch control lever (LXT95 model shown)
5.10.2 Winch Gear Lever
The winch drive has a three-position lever that controls the
winch speed.
01649
31
Fast
Push the gear lever to the left (toward the
main boom) to select a fast winch speed.
Freewheel
Place the lever in the center position to
release the winch drive and pull the winch
rope out by hand.
Slow
Pull the gear lever to the right (away from the
main boom) to select a slow winch speed.
Figure 24 – Winch gear lever
Controls
02038