Lxt95 Sliding-Axle Control - Wallenstein LXT95 Operator's Manual

LXT95 / LXT115
Log Loader Trailer
5.6.4 Dipper Boom or Log Grapple Control
Lever
Raise
Push the lever forward to raise the dipper
boom.
Lower
Pull the lever backward to lower the dipper
boom.
Turn counterclockwise
Push the lever to your LH side to turn the log
grapple counterclockwise.
Turn clockwise
Push the lever to your RH side to turn the log
grapple clockwise.
5.6.5 RH Stabilizer Control Lever
Extend
Push the lever forward to extend the RH
stabilizer.
Retract
Pull the lever backward to retract the RH
stabilizer.
5.7

LXT95 Sliding-Axle Control

The LXT95 has a second hydraulic control valve and two control
levers. The LH control lever is for the sliding axle. The valve and
control levers are located on the front of the operator control
panel.
The RH control lever is for a hydraulic winch (sold separately).
For more information, see Winch Control Lever on page 31.
Increase the trailer-tongue weight
Push the lever forward to move the axle
backward on the trailer frame.
Decrease the trailer-tongue weight
Pull the lever backward to move the axle
forward on the trailer frame.
Figure 20 – LXT95 sliding-axle control
29
Controls
01634