Hydraulic Winch - Wallenstein LXT95 Operator's Manual

Controls
• Connect the hydraulic hoses for the Articulated Tongue to
tractor supply and return remote connections.
• Pull the hitch pin, then use the tractor's remote hydraulic
control to rotate the trailer tongue.
Fig. 23 – Maneuvering with Articulated Trailer Tongue

4.6 Hydraulic Winch

(Option)
The two-speed winch is used to pull material in closer for the
grapple to pick. An auxiliary control valve is mounted on the
front of the operator console. The winch drive is mounted on the
top side of the boom. The winch specifications are different for
each grapple model, but the operation is the same.
Control Valve
• Pull the control lever back and hold to start the winch and
wind the rope in. Releasing the lever returns it to neutral
and the winch stops.
• Push the lever forward to allow the rope to unwind under
power.
01639
30
Log Trailer & Grapple
Fig. 24 – Winch Control Valve
LXT95 / LXT115
01649