Table of Contents
Advertisement
Controls
4.3 Bunk Posts
The bunk posts are designed to hold and secure heavy loads,
however are easily removed if required. To remove, lift straight
up and out.
The beveled post stop and post mount ensures that if bumped
or knocked with a grapple load the bunk posts can swing away
and return to position on their own.
Fig. 17 – Bunk Posts
4.4 Hydraulic Sliding Tandem Axle
(LXT95 only)
The sliding tandem axle adjusts tongue weight and can be used
to help balance a load or adjust the tongue weight for added
traction if required.
Check that the trailer is parked on level ground and the frame is
not under tension or twisted.
IMPORTANT! Tandem axle should be adjusted with trailer
unloaded. Tandem bolt is not accessible when loaded.
Reinserting the tandem bolt is made easier with
the help of an assistant.
1. Connect trailer to the tow vehicle.
2. Remove the tandem nut and bolt as shown.
3. Start up the hydraulic power pack or apply hydraulic power
to the control valve from the tractor.
01632
28
Log Trailer & Grapple
Fig. 18 – Tandem Axle Bolt
LXT95 / LXT115
01633
Advertisement
Table of Contents
