Table of Contents
Advertisement
WXR720/L, WXR740/L
Log Splitter
7.3 Connect to a Tow Vehicle
1. Keep bystanders away from the machine and tow vehicle.
2. Make sure there is enough room and clearance to safely
back up to the machine.
3. Slowly back the tow vehicle until the coupler on the hitch
and ball are aligned.
WXR720 Models
4. Lift the hitch and place the coupler over the ball on the
hitch.
5. Flip the latch to lock the coupler around the ball.
6. Pull out the jack stand snap lock pin and raise the jack
stand to its stowed position. Install snap lock pin to secure
it.
WXR740 Models
7. Raise the rear jack stand and secure with the snap lock pin.
All Models
8. Cross safety chains under trailer tongue and attach
securely to the tow vehicle hitch.
9. Connect the wiring harness for the lights (as equipped).
10. Reverse the above procedure when unhooking.
Figure 25 – Align the hitch
02065
31
Transport
Advertisement
Table of Contents
