Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Image Access Bookeye 5 V2A
Summary of Contents for Image Access Bookeye 5 V2A
- Page 1 Bookeye ® 5 V2A/V3A Setup instructions English 10/2022...
-
Page 2: Table Of Contents
Table of Contents Revision overview ..................3 Notes on the instructions and the manufacturer ........3 Keep instructions available ..............3 Design features in the text ..............4 Design features in illustrations ..............5 Associated documents ................5 Copyright ....................6 Contact details of the manufacturer in Germany ........ -
Page 3: Revision Overview
Revision overview Revision overview Date Rev. Name Description of Reason for change change 30.07.2021 TI/JKN First draft First published version 07.10.2022 Second draft Updated version Notes on the instructions and the manufacturer The following instructions describe the installation and operation of the Bookeye V2 and V3 variants with motorized V-glass plates. -
Page 4: Design Features In The Text
Notes on the instructions and the manufacturer Design features in the text Various elements of this guide have specified design features. This allows you to easily distinguish the following elements: normal text BUTTONS OF THE SCREEN "menu labels" ➢ Action steps •... -
Page 5: Design Features In Illustrations
Notes on the instructions and the manufacturer Design features in illustrations When elements are referred to in a legend or in the running text, they are given a number (1). Associated documents The accompanying documents include: • Unpacking and packing instructions, •... -
Page 6: Copyright
E-Mail: dokumentation@imageaccess.de Internet address: www.imageaccess.de Technical support You can reach Image Access GmbH technical support at the following e- mail address: support@imageaccess.de. Contact details of the manufacturer in the USA Image Access LP 400 N. Belvedere Drive Gallatin, TN 37066 USA Tel.: +1 (224) 293-2585... -
Page 7: Description
Description Description Task and function The scanner is used to scan images and documents of all types. The characteristics of the documents, such as size, thickness, etc., must comply with the specifications found in the technical data. The scanner is intended for use in closed rooms in the commercial sector. - Page 8 Description Designation Button Control Panel Control Panel...
- Page 9 Description The illustration below shows the ScanWizard Touch V-glass plate control panel and its controls with the V-glass plate in place. Symbol Designation Current opening position Current scan position Current glass plate position Glass plate mounted or removed Automatic mode INIT Emergency stop...
-
Page 10: Mount V-Glass Plate
Mount V-glass plate Mount V-glass plate ➢ Start the Bookeye 5 glass plate control via the CONTROL PANEL button in the menu bar of the ScanWizard Touch interface. ➢ The V-glass plate is hooked into or unhooked from the holder (2). It must always be held by the two handles! ➢... - Page 11 Mount V-glass plate The glass plate holder offers two positions for the fixing screw: 1.When the locking screw is screwed in the upper position (1), the position of the glass plate remains constant in the horizontal plane during scanning. It is intended for scanning thinner books. 2.When the locking screw is screwed in the lower position (2), the position of the glass plate remains movable in the horizontal plane during scanning, as shown in the figure below.
- Page 12 Mount V-glass plate If either the glass plate is mounted or an operation without glass plate is desired, the button INIT for initializing the glass plate must be pressed. The function measures out whether a V-glass plate is installed or not. Performs an initialization run and detects whether a glass plate is installed.
- Page 13 Mount V-glass plate If a V-glass plate was found, this is displayed in the V-glass plate control panel (1). ➢ Press the CHANGE GLASSPLATE button when removing or remounting the V-glass plate. Afterwards, an INIT is always required.
-
Page 14: Move V-Glass Plate
Move V-glass plate Move V-glass plate ➢ Use the MAX button to move the glass plate holder to the highest position. ➢ Use the MIN button to move the glass plate holder to the lowest position. ➢ Use these buttons to move the glass plate up or down in small steps. -
Page 15: Contact Pressure And Speed
Contact pressure and speed Contact pressure and speed When the glass plate is lowered, the contact pressure is always monitored. Depending on the condition of the book, this should not be higher than necessary. ➢ Use the PRESSURE slider to determine the correct contact pressure for the book being used in four stages. -
Page 16: Other Notes
Other notes Other notes The saved scan positions are always reset when the ScanWizard user changes or when the scanner is switched off. A scan can be started using the following options: ➢ ScanWizard Touch SCAN START button, ➢ the two scan keys at the book cradle plates, ➢...
Need help?
Do you have a question about the Bookeye 5 V2A and is the answer not in the manual?
Questions and answers