Table of Contents
Advertisement
6 CONTROL PANEL
6.1.2
Internal control panel
1.
Switch for gas purge or wire inching
2.
Switch for remote or local (only for
Push Pull variants)
6.1.3
Explanation of functions
Gas purging
Gas purging is used when measuring the gas flow or to flush any air or moisture
from the gas hoses before welding starts. Gas purging takes place for as long as
the button is held depressed and takes place without voltage or wire feed
starting.
Wire inching
Wire inching is used when feeding wire without applying a welding voltage. The
wire is fed as long as the button is depressed.
Remote
The remote function enables the remote control for Push Pull torch or Miggytrac/Railtrac
options and disables the external control panel on the wire feeder.
Local
The local function enables the external control panel in the wire feeder and disables the
remote control for Push Pull torch or Miggytrac/Railtrac options.
0463 739 101
3.
Knob for setting the gas flow rate (only for
product variants containing a gas flow
meter)
- 36 -
© ESAB AB 2022
Advertisement
Table of Contents
