Table of Contents
Advertisement
5. Turn the Seed Wheel to ON. The Seed Wheel will speed up to the dialed-in RPM.
The pumps will also begin pumping liquid into the atomizer, this will start the seed
treating process.
You may notice the RPM will run at a lower RPM under the load of
NOTICE
seed. Do not adjust the RPM back up. The program already has
figured in the factor for the drop in RPM.
Vous pouvez remarquer le RPM fonctionne à une vitesse de
rotation inférieure sous la charge de semences. Ne pas régler le
AVIS
RPM sauvegarde. Le programme a déjà figuré dans le facteur de
la baisse de régime
6. As you are treating the first batch of seed, time the seed as it is begins flowing out
the atomizer chute into the drum.
7. Once all the seed has passed through the seed wheel and atomizer, stop timing.
The pump(s) will automatically shut off.
LPX SEED TREATER
TREATING SEED
.
Page 49
Advertisement
Table of Contents
