Seed Metering Wheel Adjustment Screen - USC LPX 2000 Operator's Manual

SEED METERING WHEEL ADJUSTMENT SCREEN

1. TOTAL POUNDS TREATED:
which allows the operator to manually input the amount that was treated.
2. ACTUAL TIME IN SECONDS:
the previous run. Pressing this button will bring up a numeric keypad which allows the
operator to input the amount of time they want it to take to treat that amount of seed.
After the new time is entered, press the ADJUST SEED WHEEL RPM button. This
returns the operator to the previous screen, now press the SET SMW RPM to
complete the change.
3. DEFAULT CALIB.:
4. RESET TIMER:
5. AUTO RESET TIMER:
beginning of every run if more than ten seconds has passed.
6. ADJUST SEED WHEEL RPM:
made from this screen and automatically returns them to the first calibration screen.
Page 42
LPX SEED TREATER
1
3 4
Pressing this button will bring up a numeric keypad
This button indicates the time it took to complete
Pressing this button resets calibration back to factory settings.
Pressing this button zeroes out the timer.
Pressing this button resets the timer to zero at the
Pressing this button activates any of the changes
2
5 6