Utilities Screen - USC LPX 2000 Operator's Manual

This screen allows the operator to set various system parameters and view the status
of the proximity switches.
1
2
3
4
5
1. PUMP / AUX CONTROL STOP DISPLAY TIME (SEC) MODULE:
button is pressed, a numeric touch pad will appear and allow the operator to manually
adjust the length of time that the pump will remain on once the pump proximity sensor
no longer is seeing seed.
2. INLET CONVEYOR RESTART DELAY TIME (SEC) MODULE:
is pressed, a numeric touch pad will appear and allow the operator to manually adjust
the length of time the inlet conveyor remains off after the top proximity switch no longer
detects seed.
3. INLET PROXIMITY SENSOR DISPLAY:
switch located in the supply hopper above the treater is detecting seed.
4. PUMP PROXIMITY SENSOR #1 DISPLAY:
proximity switch #1, which is located in the cone of the treater or the seed wheel, is
not detecting seed.
5. PUMP PROXIMITY SENSOR #2 DISPLAY:
proximity switch #2, which is located in the seed wheel, is not detecting seed. This
display is only visible if the treater is utilizing a seed wheel.
Page 38
LPX SEED TREATER

UTILITIES SCREEN

Informs the operator when the proximity
Informs the operator when the pump
Informs the operator when the pump
When this
When this button