Laser Head Nozzles - BOSSLASER LS Series Operator's Manual

Laser Head Nozzles

In addition to the items found on the previous page, there will also be two extra nozzles within your toolbox.
These nozzles will allow you to use different lens sizes to achieve different results.
1. For 2" lens
a. Recommended lens for engraving & cutting
2. For 2.5" lens
a. Leaning more towards cutting capacity than engraving
3. For 4" lens
a. Ideally for cutting than engraving material
Document Number: 855-901 Revision: 003 Revision Date: 11/14/2022 BOSSLASER Page 22 of 48