QUICK START GUIDE FOR LS MACHINES
Setting Up the Laser for the First Time
Make sure to remove any foam material from inside of cabinet.
Remove any plastic zip-ties used for securing laser head from moving on the X
and Y Axis during shipping. Depending on what options purchased with your
laser, the crate will have several boxes outside of the laser cabinet. You
should see the common items listed below and possibly some additional
accessories:
4" Exhaust Blower (For 1416s & 1420s)
Water Pump
Document Number: 855-915
Air Compressor w/ 6mm fitting (included)
Revision: 001
6" Exhaust Blower (For 1630s & Up)
CW-3000 (left) & CW-5000 (right) Water Chiller
Revision Date: 12/11/2019
BOSSLASER - PAGE 2 of 18