Hardware Troubleshooting; Water Chiller (Cw-3000/Cw-5000); Air Compressor - BOSSLASER LS Series Operator's Manual

Hardware Troubleshooting

Water Chiller (CW-3000/CW-5000)

If the water chiller alarm is going off (a beeping noise), it can be one of two reasons. #1) The waterline hoses are
pinched so that the water cannot freely flow. #2) The water chiller does not have enough water #3) The temperature is
either below or above the alarm levels.

Air Compressor

Use the regulator that is attached to the air compressor to adjust the amount of pressure being applied onto your
material.
Document Number: 855-901 Revision: 003 Revision Date: 11/14/2022 BOSSLASER Page 46 of 48