Accessing Our "How To" Videos & Manuals; How To Access The Videos; How To Access The Manuals Online; How To Access The Manuals On The Usb - BOSSLASER LS Series Operator's Manual

Accessing Our "How To" Videos & Manuals
We strive to provide support to our customers, that is why we have a large number of videos and manuals to assist our
customers during the use or setup of their machine. In this manual, certain pages will contain a QR code. This will indicate
that there is a video located on our website that will be able to guide you through this process or give you a better idea
of how something is done.

How to Access the Videos:

Scan this QR code to access our Instructional Videos.

How to Access the Manuals Online

Scan this QR Code to access our Manuals Online

How to Access the Manuals on the USB:

1. Your LS Series Machine will come with a USB that contains the LightBurn software and a few of our manuals. The
first step is to plug in the USB that accompanied the machine.
2. Next, there should be two folders within the USB, a "USB (LightBurn)" folder and "USB (For LS Series GEN V)"
folder. There will be manuals in each folder.
3. In the "USB (LightBurn)" folder, there will be the manuals for the LightBurn software and a "READ ME" (for
installing LightBurn).
4. The "USB (For LS Series GEN V)" folder will contain the "BossMod Manual", "LS Manual", "Controller Card
Schematic" and a "User's Manual of RDC644XG Control System."
Document Number: 855-901 Revision: 003 Revision Date: 11/14/2022 BOSSLASER Page 19 of 48