Related Manuals for BOSSLASER BossMod LS
Summary of Contents for BOSSLASER BossMod LS
- Page 1 BossMod User Manual & Setup for LS & HP Machines 608 Trestle Point Sanford, FL 32771 Toll-Free: (888) 652-1555 Local: (407) 878-0880 Fax: (407) 878-0837 WWW.BOSSLASER.COM...
-
Page 3: Table Of Contents
BOSSMOD USER MANUAL & SETUP FOR LS & HP MACHINES Table of Contents BossMod All-in-One Rotary Device.....................1 1. Adjustable Angle Lift Platform ......................2 2. Accessory Platform .......................... 3 3. Chuck Mount ........................... 3 4. Pre-Tapped Hole in Chuck Base ......................4 Roller Adapter Combo ........................5 Features of the Chuck Roller Converter ..................6 Roller Scissor Lift Platform ......................6... -
Page 5: Bossmod All-In-One Rotary Device
The combo roller attachment allows you to use your base chuck and convert it to a roller system without having to buy another full roller rotary device. Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 1 of 18... -
Page 6: Adjustable Angle Lift Platform
This is crucial since the laser head is mounted on an X/Y gantry and mechanically cannot be adjusted (illustrated below). Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 2 of 18... -
Page 7: Accessory Platform
There are two different hole patterns built in the chuck mount. This was designed to accommodate various types of chuck heads. It is now possible to change your chuck head easily to fit different applications better. Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 3 of 18... -
Page 8: Pre-Tapped Hole In Chuck Base
BOSSMOD USER MANUAL & SETUP FOR LS & HP MACHINES 4. Pre-Tapped Hole in Chuck Base Pre-drilled/tapped holes These holes are to accommodate attachment to further secure various size items Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 4 of 18... -
Page 9: Roller Adapter Combo
BOSSMOD USER MANUAL & SETUP FOR LS & HP MACHINES Roller Adapter Combo (attachment consists of two pieces) The Chuck Roller Converter: The Roller Scissor Lift Platform: Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 5 of 18... -
Page 10: Features Of The Chuck Roller Converter
The platform is pre-tapped to allow the user to easily move the free-spinning wheels or even just use one to accommodate for a more stable setup (configurations illustrated below). Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 6 of 18... - Page 11 Lastly, this unique Rotary System can also be used with a “hybrid” combination of the chuck and roller to further accommodate more cylindrical objects. (illustration below) Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 7 of 18...
-
Page 12: Setting Up The Bossmod On The Machine
When you are done using the BossMod, unplug the 4-pin connector for the rotary device and plug back in the original 4-pin connector for the Y-Axis Motor. Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 8 of 18... - Page 13 For HP Machines – The USB Cable is located in your toolbox) Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 9 of 18...
- Page 14 • Rotary Axis – Y Axis • Steps Per Rotation – 10000.00 • Object Diameter - Input the diameter of the engraving surface (not where it is clamped) Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 10 of 18...
- Page 15 4” diameter or 101.6 mm) ✎NOTE: To go back to the worktable, disable the Enable Rotary by clicking the switch icon (black = off). Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 11 of 18...
-
Page 16: Setting Up In Rdworks V8
When done correctly, a 100% progress bar will appear above the buttons (as shown to the right). Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 12 of 18... - Page 17 ✎NOTE: To go back to the worktable, press the Read button > Change Enable rotating to “No” > press the Write button. Make sure the machine is on and connected to the PC via USB Cable. Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 13 of 18...
-
Page 18: Setting Up In Lasercad (Hp Machines)
To go back to the worktable, change the Rotate Fun to “Close,” then press the Enter button. Then RESET the machine to save changes to the machine. Document Number: QM – 855-914 Revision Number: 001 Revision Date: 11/1/2019 BOSSLASER - Page 14 of 18...
Need help?
Do you have a question about the BossMod LS and is the answer not in the manual?
Questions and answers