Table of Contents
Advertisement
Safety Design Features
Emergency Stop Switch
The emergency stop switch is installed as part of the control panel. The emergency stop switch controls the live wire of
the main circuit, and when the main control switch is turned off, the machine will power down.
Emission Indicator
The mission indicator is installed as part of the control panel. The two terminals of emission indicator are wires to the
Status and +24V of the control board. When the tube output laser, the board generates out a signal to make the emission
indicator light up.
Document Number: 855-901
Revision: 003
Revision Date: 11/14/2022
BOSSLASER
Page 17 of 48
Advertisement
Table of Contents
