Table of Contents
Advertisement
Safety Features & Regulatory Compliance
Laser Aperture
The "LASER APERTURE" warning label can be found inside of the working area, on the back left-hand
side behind the gantry and on the laser head. The first aperture warning label is where your laser
beam will bounce from mirror #1 to mirror #2. The second aperture warning label is where your laser
beam will exit the laser head.
Interlocked Protective Housing
The "DANGER" labels for interlocked protective housings are located on
the machine body next to every door that are accessible when interlock is
defeated.
Do Not Lift
The "DO NOT LIFT HERE" warning can be found on the tube extension for higher wattage LS
Machines. Do not lift your machine by its tube extension under any circumstances, it can break
the tube and cause damage to the machine. This part of the machine is fragile and should be
handled with care.
Document Number: 855-901
Non-Interlocked Protective Housing
The "DANGER" labels for non-interlocked doors are located on the machine
body next to the doors that are accessible/removable. This machine
produces laser radiation & all doors to the machine should be closed when
the laser is operating unless the pass-through doors are needed.
Electrical Safety
The "DANGER: High Voltage" sticker can be found on the inside of the right- hand bottom
cabinet, on the power supply. This warning indicates that precautions should be taken when
touching or handling any electrical components of the machine. Please make sure to
disconnect the laser from all power sources prior to opening these cabinets or handling the
internal electrical components.
Revision: 003
Revision Date: 11/14/2022
BOSSLASER
Page 14 of 48
Advertisement
Table of Contents
