Installing The Toner Container - Kyocera Ecosys FS-600 Service Manual

Installation and operation
Installing the printer
Important note on shipping the printer——If the printer is to be shipped or transported, be
sure to replace the (original) protective seal onto the Process unit. If the Protective seal is
not available, contact Kyocera. (There will be certain difficulty when removing the Process
unit fitted with a protective seal from the printer.)

Installing the toner container

Take the toner container from the protective bag. Shake the toner container with the
protective seal (orange color) n facing up five times or more. This thoroughly mix the toner
inside the container.
n
Carefully remove the protective seal.
FS-600/FS-680
2-8