Expanding Memory; Minimum Memory Requirements; Simm Specifications; Notes On Handling Simm - Kyocera Ecosys FS-600 Service Manual

Expanding memory

Both printer models come standard-equipped with 4MB of main memory. Printer memory
can be expanded to up to the maximum of 36 MB by installing an optional SIMM.

Minimum memory requirements

Refer to the table below for minimum memory requirements in various environments.
Printing environment
HP LaserJet 5P (factory setting)
HP LaserJet 5P with resource protection

SIMM specifications

Memory size in MB
Number of pins
Access speed
Parity
Bus width

Notes on handling SIMM

Before proceeding to install SIMM, read the following notes for handling the main circuit
board and SIMMs:
•
Protect the electronics by taking these precautions:
•
Before touching the main circuit board, touch a water pipe or other large metal
object to discharge yourself of static electricity. While doing the work, it is
recommended that you wear an antistatic wrist strap.
300 dpi
2MB
—
4, 8, 16, 32
72
80 ns or faster
Without
32 bits
2-11
Installation and operation
Expanding memory
Resolution
600 dpi
2MB
10MB
FS-600/FS-680