Inserting Simm; Testing The Expansion Memory - Kyocera Ecosys FS-600 Service Manual

Inserting SIMM

Insert the SIMM into the socket
snaps into place. Make sure that the catches at the ends of the socket fit into the holes
the ends of the SIMM board.

Testing the expansion memory

After installing SIMM in the printer, test the printer to see if the installation has been
successful. To test the expansion memory, turn printer power on and print a status page.
If the installation has been successful, the Available Memory item of the status page will
show the expanded memory size corresponding to the amount of memory added.
as shown. Carefully push the board upright until it
To remove SIMM, use the
reverse manner.
2-15
Installation and operation
Expanding memory
FS-600/FS-680
at