Introduction; Specifications; Nomenclature - John Bean EHP System Series Operation Instructions Manual

®
Fig.1
EHP System II / II E Tire Changer Operation Manual

1.0 INTRODUCTION

Congratulations on purchasing the EHP System II / IIE
electric/air tire changer.
This tire changer is designed for ease of operation, safe
handling of rims, reliability and speed.
This combination of features means more profit and added
versatility for your shop, enabling you to work with alumi-
num or magnesium alloy wheels without damaging
customer's rims.
With a minimum of maintenance and care your Tire Changer
will provide many years of trouble-free operation.
Please read this manual thoroughly before operating the
unit. Instructions on use, maintenance and operational
requirements are covered in this manual.
STORE THIS MANUAL IN A SAFE PLACE FOR
FUTURE REFERENCE. READ THIS MANUAL
THOROUGHLY BEFORE USING THE MACHINE.

1.1 SPECIFICATIONS

Operation temperature range
Electric-air tire changer for car, light commercial vehicle
and motorcycle tires designed for one-piece rims.
Shipping Weight
Air Pressure Required
Bead Breaker Force
Electrical Requirements:
Max. Torque
Max. Tire Diameter
Max. Rim Width
Rim Clamping Capacity-Outside:
Rim Clamping Capacity-Inside:
Motorcycle Wheels Clamping Capacity With Adapters

1.2 NOMENCLATURE

(Fig.1)
Before installing and using the EHP Series Tire Changer it
is suggested that you become familiar with the nomencla-
ture of the machine's components.
1. Vertical slide
2. Swing arm
3. Adjustment knob
4. Lock lever
5. Mount/demount head
6. Tower or column
7. Turntable
8. multi-position Jaw
9. Bead breaker arm
10. Bead breaker blade
11. Bead breaker pad
12. Bead lifting tool
13. Foot pedal controls
14. Bead seater/inflator pedal
15. Inflation gauge
16. Nozzle (Air jets)
- Page 12 -
+41/+122 F (+5/50 °C)
520 lbs. (236 kg)
psi 110-170 (8-12 bar)
3300 lbs. (15 kN)
115 V AC 60Hz Single Phase
740 ftxlb (1000 Nm)
40" (1016 mm)
10"-20"
12"-22"
15"-25"
12"