Inflating Tube-Type Tires; Mounting And Demounting Motorcycle Tires - John Bean EHP System Series Operation Instructions Manual

EHP System II / II E Tire Changer Operation Manual
®

5.2 INFLATING TUBE-TYPE TIRES

To inflate the tire unlock the rim and start inflating while
pressing the valve towards the inside. This is necessary
to avoid air pockets forming between tube and tire (Fig.
29). Ensure that the tire is correctly centered on the rim
and complete inflation as described in section 4.3.
Fig.29
6.0 MOUNTING AND DEMOUNT-
ING MOTORCYCLE TIRES
To mount and demount motorcycle tires it is necessary to
utilize the optional four motorcycle adaptors (part number
EAA0247G07A).
The bead-breaking, mounting and demounting technique is
the same as per the car, tubeless or tube-type tires.
NOTICE!
MOTORCYCLE RIMS MUST ALWAYS BE CLAMPED
FROM THE OUTSIDE.
NOTICE!
SUPPLY AIR PRESSURE TO THE CHANGER MUST NOT
EXCEED 110 PSI (8 BAR) WHEN CLAMPING MOTOR-
CYCLE RIMS.
- Page 42 -