Moving The Machine; Putting The Machine Out Of Service; Disposing Of The Unit; Instructions For Disposal In Eu Countries - John Bean EHP System Series Operation Instructions Manual

®
Fig.33
EHP System II / II E Tire Changer Operation Manual

8.0 MOVING THE MACHINE

In case the machine is to be moved from one working
place to another, proceed as follows:
A.
Disconnect the machine from the air and electric supply.
B.
Remove from top of the cabinet and turntable all objects
that may fall during displacement and create hazard.
C.
Hold the machine as depicted in (Fig. 33). Use belts
of a length of mm 3000 (10ft) and a capacity of kg
500 (1100 lbs). Do not use metal ropes to lift the
machine.
9.0 PUTTING THE MACHINE OUT
OF SERVICE
In case the machine is not be used for a long period of time
(6 months or more) it is necessary to disconnect air and
discharge the bead seater tank (if pro-
power service,
vided),
protect all parts that may be damaged from environ-
, protect the air hoses that may be dam-
mental intrusion
aged by the drying process.
When putting the machine back in operation, check the con-
dition of all previously protected parts, and check for correct
functioning of all devices before using the machine again.

9.1 Disposing of the unit.

When you decide to get rid of your unit, contact your
reseller for a quote or for the regulations on disposal
which apply to the unit.
9.1.1 Instructions for disposal in EU
countries
For waste electrical and electronic equipment
At the time of disposal, at the end of the lifetime of this
equipment, you must:
1. NOT dispose of the equipment as municipal waste and
separate collection is mandatory.
2. Ask the retailer about collection points authorised for
regular disposal.
3. Stick to the standards for correct waste management,
to prevent potential effects on the environment and
human health.
This symbol indicates that separate collection of waste
electrical and electronic equipment is mandatory for scrapping.
- Page 46 -