Introduction; Nomenclature - John Bean EHP System III-E Operator's Manual

1.1-1
10

1.0 Introduction

Congratulations on purchasing the "EHP System V"
electric/air tire changer.
This tire changer is designed for ease of operation, safe
handling of rims, reliability and speed.
This combination of features means more profi t and
added versatility for your shop, enabling you to work
with aluminium or magnesium alloy wheels without
damaging customer's rims.
With a minimum of maintenance and care your tire
changer will provide many years of trouble-free
operation.
Please read this manual thoroughly before operating the
unit. Instructions on use, maintenance and operational
requirements of the machine are covered in this manual.
STORE THIS MANUAL IN A SAFE PLACE FOR
FUTURE REFERENCE. READ THIS MANUAL
THOROUGHLY BEFORE USING THE MACHINE.

1.1 Nomenclature

Before installing and using the electric/air tire changer
it is suggested that you become familiar with the
nomenclature of the machine's components (Fig. 1.1-1).
1 Vertical slide
2 Mounting arm, horizontally displaceable
3 Lever with push-button
4 Handle
5 Mount/demount tool
6 Tower or column
7 Turntable
8 multi-position Jaw
9 Bead breaker arm
10 Bead breaker blade
11 Bead breaker pads
12 Air jets
13 Foot pedal controls
14 Bead seater/infl ator pedal
15 Infl ation gauge
16 Bottom bead roller
17 Top bead roller
18 Bead assist arm
19 Rise/fall control lever
20 Bead depressor arm
21 Bead depressor tool
ALL ELECTRICAL CONNECTIONS SHALL BE
PERFORMED BY A LICENCED TECHNICIAN.
ALL SERVICE MUST BE PERFORMED BY AN
AUTHORIZED SERVICE TECHNICIAN.
540.tif