Table of Contents
Advertisement
4.Check the card settings. If current settings are correct, select
Start Installation and go to step 5. Otherwise, select
Modify Parameters to change settings.
5.Select the appropriate values then press Enter. When you
are finished, press OK to exit.
6.Installation program starts installing drivers and
modifying CONFIG.SYS and PROTOCOL.INI
Select Yes then press Enter to modify the files.
7.Now, the installation is completed.
8.Reboot the computer to load driver and start LAN Manager.
Example of PROTOCOL.INI:
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 6
NCBS = 12
BINDINGS = "LMNDIS_NIF"
LANABASE = 0
[LMNDIS_NIF]
; protocol.ini session for multifunction
LAN/MODEM driver.
IOADDRESS = 0x320
INTERRUPT = 11
DRIVERNAME = LMNDIS$
2.2.3. Packet Driver Installation
1.Run
INSTALL.EXE
(A:\INSTALL).
PLANET ENW-3503 User's Manual
2 INSTALLATION
file
in
the
driver
diskette
2-5
Advertisement
Table of Contents
