Table of Contents
Advertisement
2.2.1. Novell Netware Installation
Follow the steps bellow to complete the Novell Netware
installations.
1.Run installation program INSTALL.EXE in the driver disk
(for example, A:\INSTALL).
2.Select Netware 3.x and 4.x Workstation in the installation
program dialog box.
3.Check the card settings. If current settings are correct, select
Start Installation and go to step 5. Otherwise, select
Modify Parameters to change settings.
4.Select the appropriate values then press Enter. When you
are finished, press OK to exit.
5.Installation program starts installing drivers and
modifying AUTOEXEC.BAT and NET.CFG.
Select Yes then press Enter to modify the files.
6. Now, the installation is completed.
7. Restart your computer to make Netware
connections.
PLANET ENW-3503 User's Manual
2 INSTALLATION
2-3
Advertisement
Table of Contents
