Usb Driver Installation - D-Link DSL-2320B - 24 Mbps DSL Modem User Manual

Section 5 - USB Installation

USB Driver Installation

To connect your computer to the modem by the USB cable instead of the Ethernet cable, you will need to install the
modem's USB driver. If you are completing the setup using the ethernet port on the modem, skip this section and
proceed to "Configuring your Computer". The following are general steps (may vary for each computer) to complete
the USB driver installation on a Windows 000/XP operating system.
®
The following pop-up window appears when you
connect the USB cable to your computer (with the
other end already attached to the modem).
The Found New Hardware Wizard will appear on
your screen. To continue, click Next.
D-Link DSL-30B ADSL+ Ethernet/USB Modem User Manual 10