Usb Driver Installation; Windows Xp; Window Xp - D-Link DCM-604 User Manual

DCM-604 Cable Modem EMTA Gateway
4.

USB Driver Installation

Using the USB port to connect to the Internet allows you to install the cable
modem more quickly and easily than connecting to the Internet using the
Ethernet port, since you do not need to install a network interface card (NIC).
4.1

Windows XP

1.
Connect USB cable from PC to cable modem.
2.
Connect RF cable and power on Cable Modem. Wait until it register, it will
take about 40 seconds to 4 minutes depends on network traffic. Cable
Modem may reboot if you previously connect it through Ethernet port.
3.
Windows will prompt new hardware found, insert the Driver CD into your
CD-ROM drive.
4.
You may seed this window if you had update your Windows XP to
Service Pack 2. Select "Yes, this time only" and then click Next.
5.
Select "Install the software automatically (Recommended)" and then click
Next.
5
User's Manual